Hardware Manufactured using the components

Determined on a direct Reading Vacuum Emission for (Spectrometer Swiss-ARL Make)

1.    Aluminium & Aluminium Alloy Compositions.

These items comprise of the following components:

• Steel Forgings duly hot dip galvanized.
• Steel fabricated components duly hot dip galvanized.
•  Steel Bolts, Nuts, Washers and Cotter Pins duly hot dip galvanized.
• Spring Steel Washers duly electro-plated.
• Security Clips and Split Pins made of Stainless Steel.
• Aluminium Alloy Castings
• Aluminium Alloy Forgings.
•  Aluminium / Aluminium Alloy extruded components.

For minimizing Corona and RIV (Radio Interference Voltage) losses, necessary devices are also provided on EHV (Extra High Voltage) Transmission Lines.

2.    Vibration Dampers

These control the Aeoline vibrations of the overhead conductors. These are manufactured using the following components as per IS: 9708:

• CI Damper masses duly machined and hot dip galvanized.
•  High Tension Stranded Steel Wires duly hot dip galvanized.
• Steel Bolts, Nuts, Washers Cotter Pins duly hot dip galvanizing.
•  Spring Steel Washers duly electro-plated.
• Aluminium Alloy Clamps, Sleeves and Plugs.

3.    Spacers

Spacers are members used for maintaining the required distance between bundled conductors.Spacers are manufactured from Aluminium Alloy Forgings/Aluminium Alloy Castings (duly neoprene-cushioned)/Aluminium Alloy Extruded components, bolts, nuts and washers duly hot dip galvanized and helical components. The test specification is followed as per IS: 10162. Spacers are of various types such as Line Spacers, Jumpers Spacers & Spacer Dampers

4.    Conductor Accessories

Conductor Accessories are used for joining or connecting two conductors. They are also used for repairing damaged conductors.

Conductor Accessories are manufactured using the following:

• Tubes in Aluminium & Aluminium Alloys, Aluminium Extruded Profiles, Aluminium Flat Bars, etc for AAC, AAAC & ACSR Conductor.
• Steel Sleeves manufactured from Mild Steel Rods for Mid Span Compression Joints are used for ACSR Conductors in addition to (as above) the sleeves are machined and hot dip galvanized.

The necessary quality plan is followed as per the requirements of IS: 2121 (Part II) and customers’ technical specifications.

5.    Pre-formed / helical products

These products are manufactured from formed rods, which provide uniform pressure on the conductors and thereby ensuring ‘no-local’ load concentration further no tools are required for clamping of the conductors.

6.    Busbar clamps and connectors

Busbar Clamps and Connectors are manufactured from

(a)  Aluminium Alloy Casting

(b)  Aluminium Alloy Forgings

(c)  Aluminium & Aluminium Alloy Extruded Tubes, Flat Bars, Profiles,

(d)  Bolts, Nuts and Washers duly hot dip galvanized.